Wireless Triggers v2
Free Gift

  • £36.00

The Camtraptions Wireless Trigger v2 is a versatile and reliable solution for remotely firing a camera or off-camera flashes. The new v2 triggers now feature 15 wireless channels, allowing more wireless camera traps with off-camera flash to be set up in a given area without any interference. A new power input socket on the side of the Wireless Trigger v2 makes it easy to plug in external battery packs and keep the triggers running for weeks or even months at a time!

The Camtraptions Wireless Triggers v2 are fully compatible with the v1 Triggers and Wireless PIR Motion Sensor v3.

Key features:

  • Dual-function wireless trigger, which can be used as a remote shutter release for a camera, or as a radio trigger for flashes
  • Multiple receiver units can be used to fire several remote cameras or off-camera flashes using a single Transmitter v1, Transmitter v2 or the PIR Sensor v3.
  • Wireless range of up to 120m
  • Compatible with Canon* & Nikon systems
  • Flash sync speed up to 1/320s
  • TTL pass-through on transmitter**
  • Wakes sleeping speedlights
  • New power input socket makes it easy to extend the life of the triggers with external batteries
  • Receiver standby time: 200 hours (over 2 months with the External Battery Kit)
  • 2.4GHz frequency, 15 channels

*See "Compatibility" note below.
**This means a flash or flash cable mounted on top of the transmitter can be TTL, but not flashes connected to the wireless receivers.

Remote shutter release mode

Simply plug one end of a camera connecting cable (purchased separately) into the Receiver and the other end into your camera's shutter release socket. You can then remotely fire your camera by pressing the button on the Transmitter.

Flash radio trigger mode

Slide the Transmitter in to the hot shoe on top of your camera and place your speedlight flash into the hot shoe on top of the Receiver. Your flash will now wake and fire when your camera takes a photo. You can purchase additional receivers in order to fire multiple flashes with a single transmitter.

Perfect for Camera Traps!

The Camtraptions Wireless Triggers v2 are compatible with many different camera and flash brands, including Canon and Nikon. This means you can use a Canon camera to wake and fire Nikon flashes and vice versa without any additional adapter. The triggers can wake sleeping flashes when the camera powers up which means your flashes will be ready to fire at the first shot.


One or two cameras, such as the Canon EOS 1D X, have been found to power up and fire off the first shot so quickly that the flashes do not wake up in time to fire at the first shot. Our PIR Sensor v3 can overcome this problem for fast cameras by introducing a short wake delay. Note also that Canon has crippled some entry level DSLR cameras such as the 200Dii/SL3, 2000D/T7, 3000D and 4000D by removing the universal flash sync contact from the hot shoe; these cameras can only be used with Canon speedlite flashes and cannot trigger flashes via our wireless triggers. Please contact us if you would like to confirm whether your camera is compatible.

External Battery Kits

It is also possible plug higher capacity batteries into the triggers using an External Battery Kit. The triggers can be powered by two AA batteries or two D Cell batteries for a standby time of more than two weeks or two months respectively. Please note that the maximum supply voltage cannot be greater than 3.5 volts. These external battery kits can be purchased here.

Camera Connecting Cables

The following camera cables are available:

Canon N3 Cable (purchased separately) is compatible with the following Canon cameras: EOS 10D, EOS 1D, EOS 1D C, EOS 1D mk II, EOS 1D mk II N, EOS 1D mk III, EOS 1D mk IV, EOS 1D X, EOS 1Ds, EOS 1Ds mk II, EOS 1Ds mk III, EOS 20D, EOS 20Da, EOS 30D, EOS 40D, EOS 50D, EOS 5D, EOS 5D mk II, EOS 5D mk III, EOS 5D mk IV, EOS 6D, EOS 6D mk II, EOS 7D, EOS 7D mk II, EOS R5

Canon E3 Cable (purchased separately) is compatible with the following Canon cameras: Digital Rebel, EOS 1000D, EOS 100D, EOS 1100D, EOS 1200D, EOS 300D, EOS 350D, EOS 400D, EOS 450D, EOS 500D, EOS 550D, EOS 600D, EOS 60D, EOS 60Da, EOS 650D, EOS 700D, EOS 70D, EOS R, EOS R6

Olympus cameras: E-M1, E-M1 Mark II, E-M1X

Nikon DC0 Cable (purchased separately) is compatible with the following Nikon cameras: D1, D1H, D1X, D2, D200, D2H, D2HS, D2X, D2XS, D3, D300, D300S, D3s, D3X, D4, D4s, D500, D700, D800, D800 E, D810, D850

Nikon DC2 Cable (purchased separately) is compatible with the following Nikon cameras: D3100, D3200, D3300, D5000, D5100, D5200, D5300, D600, D610, D7000, D7100, D7200, D7500, D750, D90, Df, Z6, Z7

Sony S2 Cable (purchased separatelyenables stills shooting only and is compatible with the following Sony cameras: a9, a99II, a99V, a77II, a6500, a6300, a6000, a5000, a5100, a3000, a7sII, a7s, a7III, a7RIII, a7RII, a7R, a7II, a7, a68, a58, NEX-3N, DSC-RX0, RX1RII, RX10, RX10II, RX10III, RX10 IV, RX100II, RX100III, RX100IV, RX100V, RX100 VI

Sony Video Cable v2 (purchased separately) is compatible with Sony cameras with the Multi interface terminal.

Please note: VAT will be added to UK and EU orders.

Compatibility notes: There is a compatibility issue with the Nikon SB-600 flash, where the flash will not wake up from sleep with our Wireless Triggers.

Recommended Additions