F1 Camera Trap Flash
The Camtraptions F1 Camera Trap Flash makes it easier and more affordable than ever to create a high-quality camera trap setup, complete with beautiful lighting.
With improved power-efficiency and standby times, the F1 Camera Trap Flash allows you to keep your trap running for longer.
The F1 Camera Trap Flash can be used with a wide range of camera brands and is also seamlessly compatible with the Camtraptions PIR Motion Sensor and Wireless Flash Triggers.
What's New?
The F1 Camera Trap Flash features new “stamina" modes to provide longer standby times in the field. The F1 Flash can last 5 days when powered by Ni-MH AA rechargeable batteries or 7 days with alkaline AA batteries, and this can be extended to over 12 days with our 5Ah Ni-MH Rechargeable Battery or over 24 days using the 10Ah Ni-MH Rechargeable Battery. The life of the flash can be dramatically increased, or even made unlimited, when connected to a Camtraptions Solar Panel.
The F1 Camera Trap Flash features the same high-quality construction as the Z1 and Z2 Camera Trap Zoom Flash, but with a fixed 35mm zoom level and a simplified user-interface.
A full overview of the Camtraptions flash system and comparison between the Z2, Z1 and F1 Flashes can be found here.
Key Features
- The F1 Camera Trap Flash is always ready to fire instantly after motion is detected. The instant firing results in better reliability and fewer photos spoiled by failed lighting.
- The F1 Camera Trap Flash does not require a separate ‘wake’ signal before the ‘shoot’ signal, giving it maximum compatibility with all of the main camera systems on the market. The F1 Camera Trap Flash works with any camera that has a standard flash hot shoe mount or PC sync flash output.
- It is possible to trigger the F1 Camera Trap Flash with an inexpensive Hot Shoe Adapter or direct hot shoe connection, as well as with Camtraptions Wireless Triggers or through the Waterproof Cable System.
- An external power socket has been included on the side of the flash, allowing the battery life to be easily extended by plugging in any 6V power source through our Flash Power Cable or Waterproof Cable System.
- The Camtraptions F1 Camera Trap Flash lasts 5 days when powered by Ni-MH AA rechargeable batteries, 7 days with alkaline AA batteries and 10 days with lithium AA batteries. This can be extended to over 12 days with our 5Ah Ni-MH Rechargeable Battery or over 24 days using the 10Ah Ni-MH Rechargeable Battery.
- The life of the flash can be dramatically increased, or even made unlimited, when connected to a Camtraptions Solar Panel.
- The F1 Camera Trap Flash features a robust construction with a metal hot-shoe mount and a simple user-interface.
- The F1 Camera Trap Flash recalls the last settings when it’s turned on, so you do not have to readjust the power every time you change the batteries.
- Noise has been minimised: The flash will not buzz during operation and the capacitor does not whine while charging.
- The flash features the same rotating and tilting flash head as a standard speedlight flash along with a built-in wide diffuser and a reflector panel to create catch lights in animals' eyes.
- The F1 Camera Trap Flash features a built-in thermal protection function which is activated if too many high-powered flashes are triggered in a short space of time. When thermal protection is active, the rate of fire is reduced.
Product Compatibility
- The Camtraptions F1 Camera Trap Flash works with all major camera brands with a standard hot shoe or PC sync port, including models from Canon, Nikon, Sony, Olympus and Fuji.
- The F1 Camera Trap Flash is compatible with the Camtraptions Wireless PIR Motion Sensor v3 and the PIR Motion Sensor v2, as well as any other third-party camera trigger.
- The F1 Camera Trap Flash can be used with the Camtraptions Trail Camera to create a low cost camera trap complete with natural nighttime lighting.
- The flash is compatible with the Camtraptions Wireless Triggers v2, along with many other third-party wireless flash triggers.
- A wired connection between the camera and flash is also possible using 3.5mm Flash Cables and a Hot Shoe Adapter mounted on the camera.
- The Waterproof Cable System can be used to carry both power and trigger signals to the F1 Camera Trap Flash.
- The flash can be powered by 4x alkaline or Ni-MH rechargeable internal AA batteries.
- Alternatively, a 6V external power source (such as the Camtraptions 5Ah and 10Ah Ni-MH rechargeable batteries) can be connected to the flash via the Camtraptions Flash Power Cable.
- The F1 Camera Trap Zoom Flash is fully compatible with the Camtraptions Solar Panels and Solar Adapter Cables.
*High-voltage external battery packs for Canon flashes (designed to increase recycle time) sold by other companies are not compatible with Camtraptions Camera Trap Flashes.
*The flash is not directly compatible with cameras that don’t have a central 'X' contact in the hot shoe. This includes the following entry-level Canon cameras: 1500D/2000D/Rebel T7/Kiss X90, 3000D/4000D/Rebel T100 and the 250D/Rebel SL3/Kiss X10
Specifications
- Flash brightness is set manually (this is not a TTL flash)
- Manual flash power from 1/1 to 1/128 in 0.5 stop increments
- Guide number of 38
- Powered by 4x internal AA batteries
- 6V DC external power input socket
- 3.5mm flash sync trigger socket
- Integrated wide diffuser and reflector
- Multi flash strobe mode
- Built-in thermal protection function
- Dimensions: 197mm (l) x 78mm (w) x 56mm (h)
- Weight (excluding batteries): 305g